Rules Page 9

14. Frame modifications are permitted including drilled holes

or added brackets and tubed frames.

15. Axles and carriers may be modified. Detroit Lockers, spools,

etc., are acceptable.

16. Heavy-duty clutches, auto shift kits, and high stall converters

are allowed. Must have a scatter blanket or SFI Shield or a complete

steel bell housing.

If using homemade, a minimum of 3/16" steel all around the housing

for safety purposes.

17. Dual wheels are not permitted.

18. Maximum wheelbase is 133".

19. A maximum 10" rim measured inside bead to bead is allowed.

No paddle tires, bar pulling tires, or special off-road tires.

NO CUT TIRES but Machine sipeing is OK.

Must be DOT approved tires no larger than 35" or 12.5" in width.

Bead locks are "OK".

20. Front and rear tires have to run 1/2 track or less.